Quick view Details BSP Ultralite Intake Valve Spring Retainer MSRP: Now: $4.95 Add to Cart Compare Quick view Details BSP Ultralite Exhaust Valve Spring Retainer MSRP: Now: $4.95 Add to Cart Compare Quick view Details TRJ KARTING Clone Intake and Exhaust Race Valve Seat Pair MSRP: Now: $28.00 Add to Cart Compare Quick view Details TRJ KARTING Aftermarket Clone Exhaust Race Valve Seat MSRP: Now: $15.00 Add to Cart Compare Quick view Details TRJ KARTING Aftermarket Clone Intake Race Valve Seat MSRP: Now: $15.00 Add to Cart Compare Quick view Details BSP Lightweight Lifter for 6.5 Clone MSRP: Now: $8.95 Add to Cart Compare Quick view Details sku: HSSCP HIGH STRENGTH SHORT CHROMOLY PUSHROD MSRP: Now: $2.95 Add to Cart Compare Quick view Details TRJ KARTING | sku: AKRACNCAS AKRA Ported Race Head Bare or Assembled MSRP: Now: $245.00 Choose Options Compare Quick view Details sku: dcsbp Dyno (22 lbs) BUILDER PREPARED Clone Valve Spring MSRP: Now: $4.95 Add to Cart Compare Quick view Details sku: DCS-BSH Dyno Hardened Green Stripe Builders Valve Spring (10.8lbs @ .850") (each) MSRP: Now: $4.95 Add to Cart Compare Quick view Details DYNO | sku: DCS-BSH-D Dyno Hardened RED Stripe Builders Valve Spring (10.8lbs @ .850") (each) MSRP: Now: $4.95 Add to Cart Compare Quick view Details sku: DCS-CL2 Dyno Hi-Performance Dual Valve Spring Kit for Modified Honda / Clone MSRP: Now: $29.95 Add to Cart Compare Quick view BSP Ultralite Intake Valve Spring Retainer Intake Spring Retainer for 6.5HP Clone MSRP: Now: $4.95 Add to Cart Compare Quick view BSP Ultralite Exhaust Valve Spring Retainer Exhaust Spring Retainer for 6.5HP Clone MSRP: Now: $4.95 Add to Cart Compare Quick view TRJ KARTING Clone Intake and Exhaust Race Valve Seat Pair TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. 1 each of Intake and Exhaust... MSRP: Now: $28.00 Add to Cart Compare Quick view TRJ KARTING Aftermarket Clone Exhaust Race Valve Seat TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. Available in singles and bulk... MSRP: Now: $15.00 Add to Cart Compare Quick view TRJ KARTING Aftermarket Clone Intake Race Valve Seat TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. Available in singles and bulk... MSRP: Now: $15.00 Add to Cart Compare Quick view BSP Lightweight Lifter for 6.5 Clone Lightweight Lifter for 6.5 Clone MSRP: Now: $8.95 Add to Cart Compare Quick view sku: HSSCP HIGH STRENGTH SHORT CHROMOLY PUSHROD High strength chromoly pushrod are the best pushrod available. Chromoly is a lot stronger then stainless steel and flexes a lot less which is very important with the high RPM's we are getting out of these engines. These pushrods are 1mm shorter then the... MSRP: Now: $2.95 Add to Cart Compare Quick view TRJ KARTING | sku: AKRACNCAS AKRA Ported Race Head Bare or Assembled TRJ Karting AKRA CNC Ported Cylinder heads are among the best in the country and were developed after months flow work, dyno testing and redesigns. These heads are CNC machined for consistent quality head to head. they are completely Blue Printed and... MSRP: Now: $245.00 Choose Options Compare Quick view sku: dcsbp Dyno (22 lbs) BUILDER PREPARED Clone Valve Spring Dyno A.K.R.A. BUILDER PREPARED Clone Valve Spring (22 lbs) MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-BSH Dyno Hardened Green Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Green Stripe" springs are the same as our DCS-BS 10.8 lb spring but have been through a specific process to reduce the amount of spring pressure loss from running in the engine. DCS-BS lose between .8-1.2 lbs of spring pressure where... MSRP: Now: $4.95 Add to Cart Compare Quick view DYNO | sku: DCS-BSH-D Dyno Hardened RED Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Red Stripe" spring is the strongest 10.8 lb spring on the market and thus rightfully named Heavy Duty. The Heavy Duty clone spring will allow the engine builder to custom fit their spring kits. Having been through a specific process,... MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-CL2 Dyno Hi-Performance Dual Valve Spring Kit for Modified Honda / Clone 36lb Dual Valve Spring Kit with Hardware, Clone MSRP: Now: $29.95 Add to Cart Compare Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Details BSP Ultralite Exhaust Valve Spring Retainer MSRP: Now: $4.95 Add to Cart Compare Quick view Details TRJ KARTING Clone Intake and Exhaust Race Valve Seat Pair MSRP: Now: $28.00 Add to Cart Compare Quick view Details TRJ KARTING Aftermarket Clone Exhaust Race Valve Seat MSRP: Now: $15.00 Add to Cart Compare Quick view Details TRJ KARTING Aftermarket Clone Intake Race Valve Seat MSRP: Now: $15.00 Add to Cart Compare Quick view Details BSP Lightweight Lifter for 6.5 Clone MSRP: Now: $8.95 Add to Cart Compare Quick view Details sku: HSSCP HIGH STRENGTH SHORT CHROMOLY PUSHROD MSRP: Now: $2.95 Add to Cart Compare Quick view Details TRJ KARTING | sku: AKRACNCAS AKRA Ported Race Head Bare or Assembled MSRP: Now: $245.00 Choose Options Compare Quick view Details sku: dcsbp Dyno (22 lbs) BUILDER PREPARED Clone Valve Spring MSRP: Now: $4.95 Add to Cart Compare Quick view Details sku: DCS-BSH Dyno Hardened Green Stripe Builders Valve Spring (10.8lbs @ .850") (each) MSRP: Now: $4.95 Add to Cart Compare Quick view Details DYNO | sku: DCS-BSH-D Dyno Hardened RED Stripe Builders Valve Spring (10.8lbs @ .850") (each) MSRP: Now: $4.95 Add to Cart Compare Quick view Details sku: DCS-CL2 Dyno Hi-Performance Dual Valve Spring Kit for Modified Honda / Clone MSRP: Now: $29.95 Add to Cart Compare Quick view BSP Ultralite Intake Valve Spring Retainer Intake Spring Retainer for 6.5HP Clone MSRP: Now: $4.95 Add to Cart Compare Quick view BSP Ultralite Exhaust Valve Spring Retainer Exhaust Spring Retainer for 6.5HP Clone MSRP: Now: $4.95 Add to Cart Compare Quick view TRJ KARTING Clone Intake and Exhaust Race Valve Seat Pair TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. 1 each of Intake and Exhaust... MSRP: Now: $28.00 Add to Cart Compare Quick view TRJ KARTING Aftermarket Clone Exhaust Race Valve Seat TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. Available in singles and bulk... MSRP: Now: $15.00 Add to Cart Compare Quick view TRJ KARTING Aftermarket Clone Intake Race Valve Seat TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. Available in singles and bulk... MSRP: Now: $15.00 Add to Cart Compare Quick view BSP Lightweight Lifter for 6.5 Clone Lightweight Lifter for 6.5 Clone MSRP: Now: $8.95 Add to Cart Compare Quick view sku: HSSCP HIGH STRENGTH SHORT CHROMOLY PUSHROD High strength chromoly pushrod are the best pushrod available. Chromoly is a lot stronger then stainless steel and flexes a lot less which is very important with the high RPM's we are getting out of these engines. These pushrods are 1mm shorter then the... MSRP: Now: $2.95 Add to Cart Compare Quick view TRJ KARTING | sku: AKRACNCAS AKRA Ported Race Head Bare or Assembled TRJ Karting AKRA CNC Ported Cylinder heads are among the best in the country and were developed after months flow work, dyno testing and redesigns. These heads are CNC machined for consistent quality head to head. they are completely Blue Printed and... MSRP: Now: $245.00 Choose Options Compare Quick view sku: dcsbp Dyno (22 lbs) BUILDER PREPARED Clone Valve Spring Dyno A.K.R.A. BUILDER PREPARED Clone Valve Spring (22 lbs) MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-BSH Dyno Hardened Green Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Green Stripe" springs are the same as our DCS-BS 10.8 lb spring but have been through a specific process to reduce the amount of spring pressure loss from running in the engine. DCS-BS lose between .8-1.2 lbs of spring pressure where... MSRP: Now: $4.95 Add to Cart Compare Quick view DYNO | sku: DCS-BSH-D Dyno Hardened RED Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Red Stripe" spring is the strongest 10.8 lb spring on the market and thus rightfully named Heavy Duty. The Heavy Duty clone spring will allow the engine builder to custom fit their spring kits. Having been through a specific process,... MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-CL2 Dyno Hi-Performance Dual Valve Spring Kit for Modified Honda / Clone 36lb Dual Valve Spring Kit with Hardware, Clone MSRP: Now: $29.95 Add to Cart Compare Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Details TRJ KARTING Clone Intake and Exhaust Race Valve Seat Pair MSRP: Now: $28.00 Add to Cart Compare Quick view Details TRJ KARTING Aftermarket Clone Exhaust Race Valve Seat MSRP: Now: $15.00 Add to Cart Compare Quick view Details TRJ KARTING Aftermarket Clone Intake Race Valve Seat MSRP: Now: $15.00 Add to Cart Compare Quick view Details BSP Lightweight Lifter for 6.5 Clone MSRP: Now: $8.95 Add to Cart Compare Quick view Details sku: HSSCP HIGH STRENGTH SHORT CHROMOLY PUSHROD MSRP: Now: $2.95 Add to Cart Compare Quick view Details TRJ KARTING | sku: AKRACNCAS AKRA Ported Race Head Bare or Assembled MSRP: Now: $245.00 Choose Options Compare Quick view Details sku: dcsbp Dyno (22 lbs) BUILDER PREPARED Clone Valve Spring MSRP: Now: $4.95 Add to Cart Compare Quick view Details sku: DCS-BSH Dyno Hardened Green Stripe Builders Valve Spring (10.8lbs @ .850") (each) MSRP: Now: $4.95 Add to Cart Compare Quick view Details DYNO | sku: DCS-BSH-D Dyno Hardened RED Stripe Builders Valve Spring (10.8lbs @ .850") (each) MSRP: Now: $4.95 Add to Cart Compare Quick view Details sku: DCS-CL2 Dyno Hi-Performance Dual Valve Spring Kit for Modified Honda / Clone MSRP: Now: $29.95 Add to Cart Compare Quick view BSP Ultralite Intake Valve Spring Retainer Intake Spring Retainer for 6.5HP Clone MSRP: Now: $4.95 Add to Cart Compare Quick view BSP Ultralite Exhaust Valve Spring Retainer Exhaust Spring Retainer for 6.5HP Clone MSRP: Now: $4.95 Add to Cart Compare Quick view TRJ KARTING Clone Intake and Exhaust Race Valve Seat Pair TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. 1 each of Intake and Exhaust... MSRP: Now: $28.00 Add to Cart Compare Quick view TRJ KARTING Aftermarket Clone Exhaust Race Valve Seat TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. Available in singles and bulk... MSRP: Now: $15.00 Add to Cart Compare Quick view TRJ KARTING Aftermarket Clone Intake Race Valve Seat TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. Available in singles and bulk... MSRP: Now: $15.00 Add to Cart Compare Quick view BSP Lightweight Lifter for 6.5 Clone Lightweight Lifter for 6.5 Clone MSRP: Now: $8.95 Add to Cart Compare Quick view sku: HSSCP HIGH STRENGTH SHORT CHROMOLY PUSHROD High strength chromoly pushrod are the best pushrod available. Chromoly is a lot stronger then stainless steel and flexes a lot less which is very important with the high RPM's we are getting out of these engines. These pushrods are 1mm shorter then the... MSRP: Now: $2.95 Add to Cart Compare Quick view TRJ KARTING | sku: AKRACNCAS AKRA Ported Race Head Bare or Assembled TRJ Karting AKRA CNC Ported Cylinder heads are among the best in the country and were developed after months flow work, dyno testing and redesigns. These heads are CNC machined for consistent quality head to head. they are completely Blue Printed and... MSRP: Now: $245.00 Choose Options Compare Quick view sku: dcsbp Dyno (22 lbs) BUILDER PREPARED Clone Valve Spring Dyno A.K.R.A. BUILDER PREPARED Clone Valve Spring (22 lbs) MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-BSH Dyno Hardened Green Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Green Stripe" springs are the same as our DCS-BS 10.8 lb spring but have been through a specific process to reduce the amount of spring pressure loss from running in the engine. DCS-BS lose between .8-1.2 lbs of spring pressure where... MSRP: Now: $4.95 Add to Cart Compare Quick view DYNO | sku: DCS-BSH-D Dyno Hardened RED Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Red Stripe" spring is the strongest 10.8 lb spring on the market and thus rightfully named Heavy Duty. The Heavy Duty clone spring will allow the engine builder to custom fit their spring kits. Having been through a specific process,... MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-CL2 Dyno Hi-Performance Dual Valve Spring Kit for Modified Honda / Clone 36lb Dual Valve Spring Kit with Hardware, Clone MSRP: Now: $29.95 Add to Cart Compare Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Details TRJ KARTING Aftermarket Clone Exhaust Race Valve Seat MSRP: Now: $15.00 Add to Cart Compare Quick view Details TRJ KARTING Aftermarket Clone Intake Race Valve Seat MSRP: Now: $15.00 Add to Cart Compare Quick view Details BSP Lightweight Lifter for 6.5 Clone MSRP: Now: $8.95 Add to Cart Compare Quick view Details sku: HSSCP HIGH STRENGTH SHORT CHROMOLY PUSHROD MSRP: Now: $2.95 Add to Cart Compare Quick view Details TRJ KARTING | sku: AKRACNCAS AKRA Ported Race Head Bare or Assembled MSRP: Now: $245.00 Choose Options Compare Quick view Details sku: dcsbp Dyno (22 lbs) BUILDER PREPARED Clone Valve Spring MSRP: Now: $4.95 Add to Cart Compare Quick view Details sku: DCS-BSH Dyno Hardened Green Stripe Builders Valve Spring (10.8lbs @ .850") (each) MSRP: Now: $4.95 Add to Cart Compare Quick view Details DYNO | sku: DCS-BSH-D Dyno Hardened RED Stripe Builders Valve Spring (10.8lbs @ .850") (each) MSRP: Now: $4.95 Add to Cart Compare Quick view Details sku: DCS-CL2 Dyno Hi-Performance Dual Valve Spring Kit for Modified Honda / Clone MSRP: Now: $29.95 Add to Cart Compare Quick view BSP Ultralite Intake Valve Spring Retainer Intake Spring Retainer for 6.5HP Clone MSRP: Now: $4.95 Add to Cart Compare Quick view BSP Ultralite Exhaust Valve Spring Retainer Exhaust Spring Retainer for 6.5HP Clone MSRP: Now: $4.95 Add to Cart Compare Quick view TRJ KARTING Clone Intake and Exhaust Race Valve Seat Pair TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. 1 each of Intake and Exhaust... MSRP: Now: $28.00 Add to Cart Compare Quick view TRJ KARTING Aftermarket Clone Exhaust Race Valve Seat TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. Available in singles and bulk... MSRP: Now: $15.00 Add to Cart Compare Quick view TRJ KARTING Aftermarket Clone Intake Race Valve Seat TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. Available in singles and bulk... MSRP: Now: $15.00 Add to Cart Compare Quick view BSP Lightweight Lifter for 6.5 Clone Lightweight Lifter for 6.5 Clone MSRP: Now: $8.95 Add to Cart Compare Quick view sku: HSSCP HIGH STRENGTH SHORT CHROMOLY PUSHROD High strength chromoly pushrod are the best pushrod available. Chromoly is a lot stronger then stainless steel and flexes a lot less which is very important with the high RPM's we are getting out of these engines. These pushrods are 1mm shorter then the... MSRP: Now: $2.95 Add to Cart Compare Quick view TRJ KARTING | sku: AKRACNCAS AKRA Ported Race Head Bare or Assembled TRJ Karting AKRA CNC Ported Cylinder heads are among the best in the country and were developed after months flow work, dyno testing and redesigns. These heads are CNC machined for consistent quality head to head. they are completely Blue Printed and... MSRP: Now: $245.00 Choose Options Compare Quick view sku: dcsbp Dyno (22 lbs) BUILDER PREPARED Clone Valve Spring Dyno A.K.R.A. BUILDER PREPARED Clone Valve Spring (22 lbs) MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-BSH Dyno Hardened Green Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Green Stripe" springs are the same as our DCS-BS 10.8 lb spring but have been through a specific process to reduce the amount of spring pressure loss from running in the engine. DCS-BS lose between .8-1.2 lbs of spring pressure where... MSRP: Now: $4.95 Add to Cart Compare Quick view DYNO | sku: DCS-BSH-D Dyno Hardened RED Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Red Stripe" spring is the strongest 10.8 lb spring on the market and thus rightfully named Heavy Duty. The Heavy Duty clone spring will allow the engine builder to custom fit their spring kits. Having been through a specific process,... MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-CL2 Dyno Hi-Performance Dual Valve Spring Kit for Modified Honda / Clone 36lb Dual Valve Spring Kit with Hardware, Clone MSRP: Now: $29.95 Add to Cart Compare Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Details TRJ KARTING Aftermarket Clone Intake Race Valve Seat MSRP: Now: $15.00 Add to Cart Compare Quick view Details BSP Lightweight Lifter for 6.5 Clone MSRP: Now: $8.95 Add to Cart Compare Quick view Details sku: HSSCP HIGH STRENGTH SHORT CHROMOLY PUSHROD MSRP: Now: $2.95 Add to Cart Compare Quick view Details TRJ KARTING | sku: AKRACNCAS AKRA Ported Race Head Bare or Assembled MSRP: Now: $245.00 Choose Options Compare Quick view Details sku: dcsbp Dyno (22 lbs) BUILDER PREPARED Clone Valve Spring MSRP: Now: $4.95 Add to Cart Compare Quick view Details sku: DCS-BSH Dyno Hardened Green Stripe Builders Valve Spring (10.8lbs @ .850") (each) MSRP: Now: $4.95 Add to Cart Compare Quick view Details DYNO | sku: DCS-BSH-D Dyno Hardened RED Stripe Builders Valve Spring (10.8lbs @ .850") (each) MSRP: Now: $4.95 Add to Cart Compare Quick view Details sku: DCS-CL2 Dyno Hi-Performance Dual Valve Spring Kit for Modified Honda / Clone MSRP: Now: $29.95 Add to Cart Compare Quick view BSP Ultralite Intake Valve Spring Retainer Intake Spring Retainer for 6.5HP Clone MSRP: Now: $4.95 Add to Cart Compare Quick view BSP Ultralite Exhaust Valve Spring Retainer Exhaust Spring Retainer for 6.5HP Clone MSRP: Now: $4.95 Add to Cart Compare Quick view TRJ KARTING Clone Intake and Exhaust Race Valve Seat Pair TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. 1 each of Intake and Exhaust... MSRP: Now: $28.00 Add to Cart Compare Quick view TRJ KARTING Aftermarket Clone Exhaust Race Valve Seat TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. Available in singles and bulk... MSRP: Now: $15.00 Add to Cart Compare Quick view TRJ KARTING Aftermarket Clone Intake Race Valve Seat TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. Available in singles and bulk... MSRP: Now: $15.00 Add to Cart Compare Quick view BSP Lightweight Lifter for 6.5 Clone Lightweight Lifter for 6.5 Clone MSRP: Now: $8.95 Add to Cart Compare Quick view sku: HSSCP HIGH STRENGTH SHORT CHROMOLY PUSHROD High strength chromoly pushrod are the best pushrod available. Chromoly is a lot stronger then stainless steel and flexes a lot less which is very important with the high RPM's we are getting out of these engines. These pushrods are 1mm shorter then the... MSRP: Now: $2.95 Add to Cart Compare Quick view TRJ KARTING | sku: AKRACNCAS AKRA Ported Race Head Bare or Assembled TRJ Karting AKRA CNC Ported Cylinder heads are among the best in the country and were developed after months flow work, dyno testing and redesigns. These heads are CNC machined for consistent quality head to head. they are completely Blue Printed and... MSRP: Now: $245.00 Choose Options Compare Quick view sku: dcsbp Dyno (22 lbs) BUILDER PREPARED Clone Valve Spring Dyno A.K.R.A. BUILDER PREPARED Clone Valve Spring (22 lbs) MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-BSH Dyno Hardened Green Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Green Stripe" springs are the same as our DCS-BS 10.8 lb spring but have been through a specific process to reduce the amount of spring pressure loss from running in the engine. DCS-BS lose between .8-1.2 lbs of spring pressure where... MSRP: Now: $4.95 Add to Cart Compare Quick view DYNO | sku: DCS-BSH-D Dyno Hardened RED Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Red Stripe" spring is the strongest 10.8 lb spring on the market and thus rightfully named Heavy Duty. The Heavy Duty clone spring will allow the engine builder to custom fit their spring kits. Having been through a specific process,... MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-CL2 Dyno Hi-Performance Dual Valve Spring Kit for Modified Honda / Clone 36lb Dual Valve Spring Kit with Hardware, Clone MSRP: Now: $29.95 Add to Cart Compare Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Details BSP Lightweight Lifter for 6.5 Clone MSRP: Now: $8.95 Add to Cart Compare Quick view Details sku: HSSCP HIGH STRENGTH SHORT CHROMOLY PUSHROD MSRP: Now: $2.95 Add to Cart Compare Quick view Details TRJ KARTING | sku: AKRACNCAS AKRA Ported Race Head Bare or Assembled MSRP: Now: $245.00 Choose Options Compare Quick view Details sku: dcsbp Dyno (22 lbs) BUILDER PREPARED Clone Valve Spring MSRP: Now: $4.95 Add to Cart Compare Quick view Details sku: DCS-BSH Dyno Hardened Green Stripe Builders Valve Spring (10.8lbs @ .850") (each) MSRP: Now: $4.95 Add to Cart Compare Quick view Details DYNO | sku: DCS-BSH-D Dyno Hardened RED Stripe Builders Valve Spring (10.8lbs @ .850") (each) MSRP: Now: $4.95 Add to Cart Compare Quick view Details sku: DCS-CL2 Dyno Hi-Performance Dual Valve Spring Kit for Modified Honda / Clone MSRP: Now: $29.95 Add to Cart Compare Quick view BSP Ultralite Intake Valve Spring Retainer Intake Spring Retainer for 6.5HP Clone MSRP: Now: $4.95 Add to Cart Compare Quick view BSP Ultralite Exhaust Valve Spring Retainer Exhaust Spring Retainer for 6.5HP Clone MSRP: Now: $4.95 Add to Cart Compare Quick view TRJ KARTING Clone Intake and Exhaust Race Valve Seat Pair TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. 1 each of Intake and Exhaust... MSRP: Now: $28.00 Add to Cart Compare Quick view TRJ KARTING Aftermarket Clone Exhaust Race Valve Seat TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. Available in singles and bulk... MSRP: Now: $15.00 Add to Cart Compare Quick view TRJ KARTING Aftermarket Clone Intake Race Valve Seat TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. Available in singles and bulk... MSRP: Now: $15.00 Add to Cart Compare Quick view BSP Lightweight Lifter for 6.5 Clone Lightweight Lifter for 6.5 Clone MSRP: Now: $8.95 Add to Cart Compare Quick view sku: HSSCP HIGH STRENGTH SHORT CHROMOLY PUSHROD High strength chromoly pushrod are the best pushrod available. Chromoly is a lot stronger then stainless steel and flexes a lot less which is very important with the high RPM's we are getting out of these engines. These pushrods are 1mm shorter then the... MSRP: Now: $2.95 Add to Cart Compare Quick view TRJ KARTING | sku: AKRACNCAS AKRA Ported Race Head Bare or Assembled TRJ Karting AKRA CNC Ported Cylinder heads are among the best in the country and were developed after months flow work, dyno testing and redesigns. These heads are CNC machined for consistent quality head to head. they are completely Blue Printed and... MSRP: Now: $245.00 Choose Options Compare Quick view sku: dcsbp Dyno (22 lbs) BUILDER PREPARED Clone Valve Spring Dyno A.K.R.A. BUILDER PREPARED Clone Valve Spring (22 lbs) MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-BSH Dyno Hardened Green Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Green Stripe" springs are the same as our DCS-BS 10.8 lb spring but have been through a specific process to reduce the amount of spring pressure loss from running in the engine. DCS-BS lose between .8-1.2 lbs of spring pressure where... MSRP: Now: $4.95 Add to Cart Compare Quick view DYNO | sku: DCS-BSH-D Dyno Hardened RED Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Red Stripe" spring is the strongest 10.8 lb spring on the market and thus rightfully named Heavy Duty. The Heavy Duty clone spring will allow the engine builder to custom fit their spring kits. Having been through a specific process,... MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-CL2 Dyno Hi-Performance Dual Valve Spring Kit for Modified Honda / Clone 36lb Dual Valve Spring Kit with Hardware, Clone MSRP: Now: $29.95 Add to Cart Compare Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Details sku: HSSCP HIGH STRENGTH SHORT CHROMOLY PUSHROD MSRP: Now: $2.95 Add to Cart Compare Quick view Details TRJ KARTING | sku: AKRACNCAS AKRA Ported Race Head Bare or Assembled MSRP: Now: $245.00 Choose Options Compare Quick view Details sku: dcsbp Dyno (22 lbs) BUILDER PREPARED Clone Valve Spring MSRP: Now: $4.95 Add to Cart Compare Quick view Details sku: DCS-BSH Dyno Hardened Green Stripe Builders Valve Spring (10.8lbs @ .850") (each) MSRP: Now: $4.95 Add to Cart Compare Quick view Details DYNO | sku: DCS-BSH-D Dyno Hardened RED Stripe Builders Valve Spring (10.8lbs @ .850") (each) MSRP: Now: $4.95 Add to Cart Compare Quick view Details sku: DCS-CL2 Dyno Hi-Performance Dual Valve Spring Kit for Modified Honda / Clone MSRP: Now: $29.95 Add to Cart Compare Quick view BSP Ultralite Intake Valve Spring Retainer Intake Spring Retainer for 6.5HP Clone MSRP: Now: $4.95 Add to Cart Compare Quick view BSP Ultralite Exhaust Valve Spring Retainer Exhaust Spring Retainer for 6.5HP Clone MSRP: Now: $4.95 Add to Cart Compare Quick view TRJ KARTING Clone Intake and Exhaust Race Valve Seat Pair TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. 1 each of Intake and Exhaust... MSRP: Now: $28.00 Add to Cart Compare Quick view TRJ KARTING Aftermarket Clone Exhaust Race Valve Seat TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. Available in singles and bulk... MSRP: Now: $15.00 Add to Cart Compare Quick view TRJ KARTING Aftermarket Clone Intake Race Valve Seat TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. Available in singles and bulk... MSRP: Now: $15.00 Add to Cart Compare Quick view BSP Lightweight Lifter for 6.5 Clone Lightweight Lifter for 6.5 Clone MSRP: Now: $8.95 Add to Cart Compare Quick view sku: HSSCP HIGH STRENGTH SHORT CHROMOLY PUSHROD High strength chromoly pushrod are the best pushrod available. Chromoly is a lot stronger then stainless steel and flexes a lot less which is very important with the high RPM's we are getting out of these engines. These pushrods are 1mm shorter then the... MSRP: Now: $2.95 Add to Cart Compare Quick view TRJ KARTING | sku: AKRACNCAS AKRA Ported Race Head Bare or Assembled TRJ Karting AKRA CNC Ported Cylinder heads are among the best in the country and were developed after months flow work, dyno testing and redesigns. These heads are CNC machined for consistent quality head to head. they are completely Blue Printed and... MSRP: Now: $245.00 Choose Options Compare Quick view sku: dcsbp Dyno (22 lbs) BUILDER PREPARED Clone Valve Spring Dyno A.K.R.A. BUILDER PREPARED Clone Valve Spring (22 lbs) MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-BSH Dyno Hardened Green Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Green Stripe" springs are the same as our DCS-BS 10.8 lb spring but have been through a specific process to reduce the amount of spring pressure loss from running in the engine. DCS-BS lose between .8-1.2 lbs of spring pressure where... MSRP: Now: $4.95 Add to Cart Compare Quick view DYNO | sku: DCS-BSH-D Dyno Hardened RED Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Red Stripe" spring is the strongest 10.8 lb spring on the market and thus rightfully named Heavy Duty. The Heavy Duty clone spring will allow the engine builder to custom fit their spring kits. Having been through a specific process,... MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-CL2 Dyno Hi-Performance Dual Valve Spring Kit for Modified Honda / Clone 36lb Dual Valve Spring Kit with Hardware, Clone MSRP: Now: $29.95 Add to Cart Compare Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Details TRJ KARTING | sku: AKRACNCAS AKRA Ported Race Head Bare or Assembled MSRP: Now: $245.00 Choose Options Compare Quick view Details sku: dcsbp Dyno (22 lbs) BUILDER PREPARED Clone Valve Spring MSRP: Now: $4.95 Add to Cart Compare Quick view Details sku: DCS-BSH Dyno Hardened Green Stripe Builders Valve Spring (10.8lbs @ .850") (each) MSRP: Now: $4.95 Add to Cart Compare Quick view Details DYNO | sku: DCS-BSH-D Dyno Hardened RED Stripe Builders Valve Spring (10.8lbs @ .850") (each) MSRP: Now: $4.95 Add to Cart Compare Quick view Details sku: DCS-CL2 Dyno Hi-Performance Dual Valve Spring Kit for Modified Honda / Clone MSRP: Now: $29.95 Add to Cart Compare Quick view BSP Ultralite Intake Valve Spring Retainer Intake Spring Retainer for 6.5HP Clone MSRP: Now: $4.95 Add to Cart Compare Quick view BSP Ultralite Exhaust Valve Spring Retainer Exhaust Spring Retainer for 6.5HP Clone MSRP: Now: $4.95 Add to Cart Compare Quick view TRJ KARTING Clone Intake and Exhaust Race Valve Seat Pair TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. 1 each of Intake and Exhaust... MSRP: Now: $28.00 Add to Cart Compare Quick view TRJ KARTING Aftermarket Clone Exhaust Race Valve Seat TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. Available in singles and bulk... MSRP: Now: $15.00 Add to Cart Compare Quick view TRJ KARTING Aftermarket Clone Intake Race Valve Seat TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. Available in singles and bulk... MSRP: Now: $15.00 Add to Cart Compare Quick view BSP Lightweight Lifter for 6.5 Clone Lightweight Lifter for 6.5 Clone MSRP: Now: $8.95 Add to Cart Compare Quick view sku: HSSCP HIGH STRENGTH SHORT CHROMOLY PUSHROD High strength chromoly pushrod are the best pushrod available. Chromoly is a lot stronger then stainless steel and flexes a lot less which is very important with the high RPM's we are getting out of these engines. These pushrods are 1mm shorter then the... MSRP: Now: $2.95 Add to Cart Compare Quick view TRJ KARTING | sku: AKRACNCAS AKRA Ported Race Head Bare or Assembled TRJ Karting AKRA CNC Ported Cylinder heads are among the best in the country and were developed after months flow work, dyno testing and redesigns. These heads are CNC machined for consistent quality head to head. they are completely Blue Printed and... MSRP: Now: $245.00 Choose Options Compare Quick view sku: dcsbp Dyno (22 lbs) BUILDER PREPARED Clone Valve Spring Dyno A.K.R.A. BUILDER PREPARED Clone Valve Spring (22 lbs) MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-BSH Dyno Hardened Green Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Green Stripe" springs are the same as our DCS-BS 10.8 lb spring but have been through a specific process to reduce the amount of spring pressure loss from running in the engine. DCS-BS lose between .8-1.2 lbs of spring pressure where... MSRP: Now: $4.95 Add to Cart Compare Quick view DYNO | sku: DCS-BSH-D Dyno Hardened RED Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Red Stripe" spring is the strongest 10.8 lb spring on the market and thus rightfully named Heavy Duty. The Heavy Duty clone spring will allow the engine builder to custom fit their spring kits. Having been through a specific process,... MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-CL2 Dyno Hi-Performance Dual Valve Spring Kit for Modified Honda / Clone 36lb Dual Valve Spring Kit with Hardware, Clone MSRP: Now: $29.95 Add to Cart Compare Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Details sku: dcsbp Dyno (22 lbs) BUILDER PREPARED Clone Valve Spring MSRP: Now: $4.95 Add to Cart Compare Quick view Details sku: DCS-BSH Dyno Hardened Green Stripe Builders Valve Spring (10.8lbs @ .850") (each) MSRP: Now: $4.95 Add to Cart Compare Quick view Details DYNO | sku: DCS-BSH-D Dyno Hardened RED Stripe Builders Valve Spring (10.8lbs @ .850") (each) MSRP: Now: $4.95 Add to Cart Compare Quick view Details sku: DCS-CL2 Dyno Hi-Performance Dual Valve Spring Kit for Modified Honda / Clone MSRP: Now: $29.95 Add to Cart Compare Quick view BSP Ultralite Intake Valve Spring Retainer Intake Spring Retainer for 6.5HP Clone MSRP: Now: $4.95 Add to Cart Compare Quick view BSP Ultralite Exhaust Valve Spring Retainer Exhaust Spring Retainer for 6.5HP Clone MSRP: Now: $4.95 Add to Cart Compare Quick view TRJ KARTING Clone Intake and Exhaust Race Valve Seat Pair TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. 1 each of Intake and Exhaust... MSRP: Now: $28.00 Add to Cart Compare Quick view TRJ KARTING Aftermarket Clone Exhaust Race Valve Seat TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. Available in singles and bulk... MSRP: Now: $15.00 Add to Cart Compare Quick view TRJ KARTING Aftermarket Clone Intake Race Valve Seat TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. Available in singles and bulk... MSRP: Now: $15.00 Add to Cart Compare Quick view BSP Lightweight Lifter for 6.5 Clone Lightweight Lifter for 6.5 Clone MSRP: Now: $8.95 Add to Cart Compare Quick view sku: HSSCP HIGH STRENGTH SHORT CHROMOLY PUSHROD High strength chromoly pushrod are the best pushrod available. Chromoly is a lot stronger then stainless steel and flexes a lot less which is very important with the high RPM's we are getting out of these engines. These pushrods are 1mm shorter then the... MSRP: Now: $2.95 Add to Cart Compare Quick view TRJ KARTING | sku: AKRACNCAS AKRA Ported Race Head Bare or Assembled TRJ Karting AKRA CNC Ported Cylinder heads are among the best in the country and were developed after months flow work, dyno testing and redesigns. These heads are CNC machined for consistent quality head to head. they are completely Blue Printed and... MSRP: Now: $245.00 Choose Options Compare Quick view sku: dcsbp Dyno (22 lbs) BUILDER PREPARED Clone Valve Spring Dyno A.K.R.A. BUILDER PREPARED Clone Valve Spring (22 lbs) MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-BSH Dyno Hardened Green Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Green Stripe" springs are the same as our DCS-BS 10.8 lb spring but have been through a specific process to reduce the amount of spring pressure loss from running in the engine. DCS-BS lose between .8-1.2 lbs of spring pressure where... MSRP: Now: $4.95 Add to Cart Compare Quick view DYNO | sku: DCS-BSH-D Dyno Hardened RED Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Red Stripe" spring is the strongest 10.8 lb spring on the market and thus rightfully named Heavy Duty. The Heavy Duty clone spring will allow the engine builder to custom fit their spring kits. Having been through a specific process,... MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-CL2 Dyno Hi-Performance Dual Valve Spring Kit for Modified Honda / Clone 36lb Dual Valve Spring Kit with Hardware, Clone MSRP: Now: $29.95 Add to Cart Compare Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Details sku: DCS-BSH Dyno Hardened Green Stripe Builders Valve Spring (10.8lbs @ .850") (each) MSRP: Now: $4.95 Add to Cart Compare Quick view Details DYNO | sku: DCS-BSH-D Dyno Hardened RED Stripe Builders Valve Spring (10.8lbs @ .850") (each) MSRP: Now: $4.95 Add to Cart Compare Quick view Details sku: DCS-CL2 Dyno Hi-Performance Dual Valve Spring Kit for Modified Honda / Clone MSRP: Now: $29.95 Add to Cart Compare Quick view BSP Ultralite Intake Valve Spring Retainer Intake Spring Retainer for 6.5HP Clone MSRP: Now: $4.95 Add to Cart Compare Quick view BSP Ultralite Exhaust Valve Spring Retainer Exhaust Spring Retainer for 6.5HP Clone MSRP: Now: $4.95 Add to Cart Compare Quick view TRJ KARTING Clone Intake and Exhaust Race Valve Seat Pair TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. 1 each of Intake and Exhaust... MSRP: Now: $28.00 Add to Cart Compare Quick view TRJ KARTING Aftermarket Clone Exhaust Race Valve Seat TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. Available in singles and bulk... MSRP: Now: $15.00 Add to Cart Compare Quick view TRJ KARTING Aftermarket Clone Intake Race Valve Seat TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. Available in singles and bulk... MSRP: Now: $15.00 Add to Cart Compare Quick view BSP Lightweight Lifter for 6.5 Clone Lightweight Lifter for 6.5 Clone MSRP: Now: $8.95 Add to Cart Compare Quick view sku: HSSCP HIGH STRENGTH SHORT CHROMOLY PUSHROD High strength chromoly pushrod are the best pushrod available. Chromoly is a lot stronger then stainless steel and flexes a lot less which is very important with the high RPM's we are getting out of these engines. These pushrods are 1mm shorter then the... MSRP: Now: $2.95 Add to Cart Compare Quick view TRJ KARTING | sku: AKRACNCAS AKRA Ported Race Head Bare or Assembled TRJ Karting AKRA CNC Ported Cylinder heads are among the best in the country and were developed after months flow work, dyno testing and redesigns. These heads are CNC machined for consistent quality head to head. they are completely Blue Printed and... MSRP: Now: $245.00 Choose Options Compare Quick view sku: dcsbp Dyno (22 lbs) BUILDER PREPARED Clone Valve Spring Dyno A.K.R.A. BUILDER PREPARED Clone Valve Spring (22 lbs) MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-BSH Dyno Hardened Green Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Green Stripe" springs are the same as our DCS-BS 10.8 lb spring but have been through a specific process to reduce the amount of spring pressure loss from running in the engine. DCS-BS lose between .8-1.2 lbs of spring pressure where... MSRP: Now: $4.95 Add to Cart Compare Quick view DYNO | sku: DCS-BSH-D Dyno Hardened RED Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Red Stripe" spring is the strongest 10.8 lb spring on the market and thus rightfully named Heavy Duty. The Heavy Duty clone spring will allow the engine builder to custom fit their spring kits. Having been through a specific process,... MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-CL2 Dyno Hi-Performance Dual Valve Spring Kit for Modified Honda / Clone 36lb Dual Valve Spring Kit with Hardware, Clone MSRP: Now: $29.95 Add to Cart Compare Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Details DYNO | sku: DCS-BSH-D Dyno Hardened RED Stripe Builders Valve Spring (10.8lbs @ .850") (each) MSRP: Now: $4.95 Add to Cart Compare Quick view Details sku: DCS-CL2 Dyno Hi-Performance Dual Valve Spring Kit for Modified Honda / Clone MSRP: Now: $29.95 Add to Cart Compare Quick view BSP Ultralite Intake Valve Spring Retainer Intake Spring Retainer for 6.5HP Clone MSRP: Now: $4.95 Add to Cart Compare Quick view BSP Ultralite Exhaust Valve Spring Retainer Exhaust Spring Retainer for 6.5HP Clone MSRP: Now: $4.95 Add to Cart Compare Quick view TRJ KARTING Clone Intake and Exhaust Race Valve Seat Pair TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. 1 each of Intake and Exhaust... MSRP: Now: $28.00 Add to Cart Compare Quick view TRJ KARTING Aftermarket Clone Exhaust Race Valve Seat TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. Available in singles and bulk... MSRP: Now: $15.00 Add to Cart Compare Quick view TRJ KARTING Aftermarket Clone Intake Race Valve Seat TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. Available in singles and bulk... MSRP: Now: $15.00 Add to Cart Compare Quick view BSP Lightweight Lifter for 6.5 Clone Lightweight Lifter for 6.5 Clone MSRP: Now: $8.95 Add to Cart Compare Quick view sku: HSSCP HIGH STRENGTH SHORT CHROMOLY PUSHROD High strength chromoly pushrod are the best pushrod available. Chromoly is a lot stronger then stainless steel and flexes a lot less which is very important with the high RPM's we are getting out of these engines. These pushrods are 1mm shorter then the... MSRP: Now: $2.95 Add to Cart Compare Quick view TRJ KARTING | sku: AKRACNCAS AKRA Ported Race Head Bare or Assembled TRJ Karting AKRA CNC Ported Cylinder heads are among the best in the country and were developed after months flow work, dyno testing and redesigns. These heads are CNC machined for consistent quality head to head. they are completely Blue Printed and... MSRP: Now: $245.00 Choose Options Compare Quick view sku: dcsbp Dyno (22 lbs) BUILDER PREPARED Clone Valve Spring Dyno A.K.R.A. BUILDER PREPARED Clone Valve Spring (22 lbs) MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-BSH Dyno Hardened Green Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Green Stripe" springs are the same as our DCS-BS 10.8 lb spring but have been through a specific process to reduce the amount of spring pressure loss from running in the engine. DCS-BS lose between .8-1.2 lbs of spring pressure where... MSRP: Now: $4.95 Add to Cart Compare Quick view DYNO | sku: DCS-BSH-D Dyno Hardened RED Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Red Stripe" spring is the strongest 10.8 lb spring on the market and thus rightfully named Heavy Duty. The Heavy Duty clone spring will allow the engine builder to custom fit their spring kits. Having been through a specific process,... MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-CL2 Dyno Hi-Performance Dual Valve Spring Kit for Modified Honda / Clone 36lb Dual Valve Spring Kit with Hardware, Clone MSRP: Now: $29.95 Add to Cart Compare Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Details sku: DCS-CL2 Dyno Hi-Performance Dual Valve Spring Kit for Modified Honda / Clone MSRP: Now: $29.95 Add to Cart Compare Quick view BSP Ultralite Intake Valve Spring Retainer Intake Spring Retainer for 6.5HP Clone MSRP: Now: $4.95 Add to Cart Compare Quick view BSP Ultralite Exhaust Valve Spring Retainer Exhaust Spring Retainer for 6.5HP Clone MSRP: Now: $4.95 Add to Cart Compare Quick view TRJ KARTING Clone Intake and Exhaust Race Valve Seat Pair TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. 1 each of Intake and Exhaust... MSRP: Now: $28.00 Add to Cart Compare Quick view TRJ KARTING Aftermarket Clone Exhaust Race Valve Seat TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. Available in singles and bulk... MSRP: Now: $15.00 Add to Cart Compare Quick view TRJ KARTING Aftermarket Clone Intake Race Valve Seat TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. Available in singles and bulk... MSRP: Now: $15.00 Add to Cart Compare Quick view BSP Lightweight Lifter for 6.5 Clone Lightweight Lifter for 6.5 Clone MSRP: Now: $8.95 Add to Cart Compare Quick view sku: HSSCP HIGH STRENGTH SHORT CHROMOLY PUSHROD High strength chromoly pushrod are the best pushrod available. Chromoly is a lot stronger then stainless steel and flexes a lot less which is very important with the high RPM's we are getting out of these engines. These pushrods are 1mm shorter then the... MSRP: Now: $2.95 Add to Cart Compare Quick view TRJ KARTING | sku: AKRACNCAS AKRA Ported Race Head Bare or Assembled TRJ Karting AKRA CNC Ported Cylinder heads are among the best in the country and were developed after months flow work, dyno testing and redesigns. These heads are CNC machined for consistent quality head to head. they are completely Blue Printed and... MSRP: Now: $245.00 Choose Options Compare Quick view sku: dcsbp Dyno (22 lbs) BUILDER PREPARED Clone Valve Spring Dyno A.K.R.A. BUILDER PREPARED Clone Valve Spring (22 lbs) MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-BSH Dyno Hardened Green Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Green Stripe" springs are the same as our DCS-BS 10.8 lb spring but have been through a specific process to reduce the amount of spring pressure loss from running in the engine. DCS-BS lose between .8-1.2 lbs of spring pressure where... MSRP: Now: $4.95 Add to Cart Compare Quick view DYNO | sku: DCS-BSH-D Dyno Hardened RED Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Red Stripe" spring is the strongest 10.8 lb spring on the market and thus rightfully named Heavy Duty. The Heavy Duty clone spring will allow the engine builder to custom fit their spring kits. Having been through a specific process,... MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-CL2 Dyno Hi-Performance Dual Valve Spring Kit for Modified Honda / Clone 36lb Dual Valve Spring Kit with Hardware, Clone MSRP: Now: $29.95 Add to Cart Compare Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view BSP Ultralite Intake Valve Spring Retainer Intake Spring Retainer for 6.5HP Clone MSRP: Now: $4.95 Add to Cart Compare Quick view BSP Ultralite Exhaust Valve Spring Retainer Exhaust Spring Retainer for 6.5HP Clone MSRP: Now: $4.95 Add to Cart Compare Quick view TRJ KARTING Clone Intake and Exhaust Race Valve Seat Pair TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. 1 each of Intake and Exhaust... MSRP: Now: $28.00 Add to Cart Compare Quick view TRJ KARTING Aftermarket Clone Exhaust Race Valve Seat TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. Available in singles and bulk... MSRP: Now: $15.00 Add to Cart Compare Quick view TRJ KARTING Aftermarket Clone Intake Race Valve Seat TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. Available in singles and bulk... MSRP: Now: $15.00 Add to Cart Compare Quick view BSP Lightweight Lifter for 6.5 Clone Lightweight Lifter for 6.5 Clone MSRP: Now: $8.95 Add to Cart Compare Quick view sku: HSSCP HIGH STRENGTH SHORT CHROMOLY PUSHROD High strength chromoly pushrod are the best pushrod available. Chromoly is a lot stronger then stainless steel and flexes a lot less which is very important with the high RPM's we are getting out of these engines. These pushrods are 1mm shorter then the... MSRP: Now: $2.95 Add to Cart Compare Quick view TRJ KARTING | sku: AKRACNCAS AKRA Ported Race Head Bare or Assembled TRJ Karting AKRA CNC Ported Cylinder heads are among the best in the country and were developed after months flow work, dyno testing and redesigns. These heads are CNC machined for consistent quality head to head. they are completely Blue Printed and... MSRP: Now: $245.00 Choose Options Compare Quick view sku: dcsbp Dyno (22 lbs) BUILDER PREPARED Clone Valve Spring Dyno A.K.R.A. BUILDER PREPARED Clone Valve Spring (22 lbs) MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-BSH Dyno Hardened Green Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Green Stripe" springs are the same as our DCS-BS 10.8 lb spring but have been through a specific process to reduce the amount of spring pressure loss from running in the engine. DCS-BS lose between .8-1.2 lbs of spring pressure where... MSRP: Now: $4.95 Add to Cart Compare Quick view DYNO | sku: DCS-BSH-D Dyno Hardened RED Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Red Stripe" spring is the strongest 10.8 lb spring on the market and thus rightfully named Heavy Duty. The Heavy Duty clone spring will allow the engine builder to custom fit their spring kits. Having been through a specific process,... MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-CL2 Dyno Hi-Performance Dual Valve Spring Kit for Modified Honda / Clone 36lb Dual Valve Spring Kit with Hardware, Clone MSRP: Now: $29.95 Add to Cart Compare Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view BSP Ultralite Exhaust Valve Spring Retainer Exhaust Spring Retainer for 6.5HP Clone MSRP: Now: $4.95 Add to Cart Compare Quick view TRJ KARTING Clone Intake and Exhaust Race Valve Seat Pair TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. 1 each of Intake and Exhaust... MSRP: Now: $28.00 Add to Cart Compare Quick view TRJ KARTING Aftermarket Clone Exhaust Race Valve Seat TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. Available in singles and bulk... MSRP: Now: $15.00 Add to Cart Compare Quick view TRJ KARTING Aftermarket Clone Intake Race Valve Seat TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. Available in singles and bulk... MSRP: Now: $15.00 Add to Cart Compare Quick view BSP Lightweight Lifter for 6.5 Clone Lightweight Lifter for 6.5 Clone MSRP: Now: $8.95 Add to Cart Compare Quick view sku: HSSCP HIGH STRENGTH SHORT CHROMOLY PUSHROD High strength chromoly pushrod are the best pushrod available. Chromoly is a lot stronger then stainless steel and flexes a lot less which is very important with the high RPM's we are getting out of these engines. These pushrods are 1mm shorter then the... MSRP: Now: $2.95 Add to Cart Compare Quick view TRJ KARTING | sku: AKRACNCAS AKRA Ported Race Head Bare or Assembled TRJ Karting AKRA CNC Ported Cylinder heads are among the best in the country and were developed after months flow work, dyno testing and redesigns. These heads are CNC machined for consistent quality head to head. they are completely Blue Printed and... MSRP: Now: $245.00 Choose Options Compare Quick view sku: dcsbp Dyno (22 lbs) BUILDER PREPARED Clone Valve Spring Dyno A.K.R.A. BUILDER PREPARED Clone Valve Spring (22 lbs) MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-BSH Dyno Hardened Green Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Green Stripe" springs are the same as our DCS-BS 10.8 lb spring but have been through a specific process to reduce the amount of spring pressure loss from running in the engine. DCS-BS lose between .8-1.2 lbs of spring pressure where... MSRP: Now: $4.95 Add to Cart Compare Quick view DYNO | sku: DCS-BSH-D Dyno Hardened RED Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Red Stripe" spring is the strongest 10.8 lb spring on the market and thus rightfully named Heavy Duty. The Heavy Duty clone spring will allow the engine builder to custom fit their spring kits. Having been through a specific process,... MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-CL2 Dyno Hi-Performance Dual Valve Spring Kit for Modified Honda / Clone 36lb Dual Valve Spring Kit with Hardware, Clone MSRP: Now: $29.95 Add to Cart Compare Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view TRJ KARTING Clone Intake and Exhaust Race Valve Seat Pair TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. 1 each of Intake and Exhaust... MSRP: Now: $28.00 Add to Cart Compare Quick view TRJ KARTING Aftermarket Clone Exhaust Race Valve Seat TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. Available in singles and bulk... MSRP: Now: $15.00 Add to Cart Compare Quick view TRJ KARTING Aftermarket Clone Intake Race Valve Seat TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. Available in singles and bulk... MSRP: Now: $15.00 Add to Cart Compare Quick view BSP Lightweight Lifter for 6.5 Clone Lightweight Lifter for 6.5 Clone MSRP: Now: $8.95 Add to Cart Compare Quick view sku: HSSCP HIGH STRENGTH SHORT CHROMOLY PUSHROD High strength chromoly pushrod are the best pushrod available. Chromoly is a lot stronger then stainless steel and flexes a lot less which is very important with the high RPM's we are getting out of these engines. These pushrods are 1mm shorter then the... MSRP: Now: $2.95 Add to Cart Compare Quick view TRJ KARTING | sku: AKRACNCAS AKRA Ported Race Head Bare or Assembled TRJ Karting AKRA CNC Ported Cylinder heads are among the best in the country and were developed after months flow work, dyno testing and redesigns. These heads are CNC machined for consistent quality head to head. they are completely Blue Printed and... MSRP: Now: $245.00 Choose Options Compare Quick view sku: dcsbp Dyno (22 lbs) BUILDER PREPARED Clone Valve Spring Dyno A.K.R.A. BUILDER PREPARED Clone Valve Spring (22 lbs) MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-BSH Dyno Hardened Green Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Green Stripe" springs are the same as our DCS-BS 10.8 lb spring but have been through a specific process to reduce the amount of spring pressure loss from running in the engine. DCS-BS lose between .8-1.2 lbs of spring pressure where... MSRP: Now: $4.95 Add to Cart Compare Quick view DYNO | sku: DCS-BSH-D Dyno Hardened RED Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Red Stripe" spring is the strongest 10.8 lb spring on the market and thus rightfully named Heavy Duty. The Heavy Duty clone spring will allow the engine builder to custom fit their spring kits. Having been through a specific process,... MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-CL2 Dyno Hi-Performance Dual Valve Spring Kit for Modified Honda / Clone 36lb Dual Valve Spring Kit with Hardware, Clone MSRP: Now: $29.95 Add to Cart Compare Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view TRJ KARTING Aftermarket Clone Exhaust Race Valve Seat TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. Available in singles and bulk... MSRP: Now: $15.00 Add to Cart Compare Quick view TRJ KARTING Aftermarket Clone Intake Race Valve Seat TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. Available in singles and bulk... MSRP: Now: $15.00 Add to Cart Compare Quick view BSP Lightweight Lifter for 6.5 Clone Lightweight Lifter for 6.5 Clone MSRP: Now: $8.95 Add to Cart Compare Quick view sku: HSSCP HIGH STRENGTH SHORT CHROMOLY PUSHROD High strength chromoly pushrod are the best pushrod available. Chromoly is a lot stronger then stainless steel and flexes a lot less which is very important with the high RPM's we are getting out of these engines. These pushrods are 1mm shorter then the... MSRP: Now: $2.95 Add to Cart Compare Quick view TRJ KARTING | sku: AKRACNCAS AKRA Ported Race Head Bare or Assembled TRJ Karting AKRA CNC Ported Cylinder heads are among the best in the country and were developed after months flow work, dyno testing and redesigns. These heads are CNC machined for consistent quality head to head. they are completely Blue Printed and... MSRP: Now: $245.00 Choose Options Compare Quick view sku: dcsbp Dyno (22 lbs) BUILDER PREPARED Clone Valve Spring Dyno A.K.R.A. BUILDER PREPARED Clone Valve Spring (22 lbs) MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-BSH Dyno Hardened Green Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Green Stripe" springs are the same as our DCS-BS 10.8 lb spring but have been through a specific process to reduce the amount of spring pressure loss from running in the engine. DCS-BS lose between .8-1.2 lbs of spring pressure where... MSRP: Now: $4.95 Add to Cart Compare Quick view DYNO | sku: DCS-BSH-D Dyno Hardened RED Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Red Stripe" spring is the strongest 10.8 lb spring on the market and thus rightfully named Heavy Duty. The Heavy Duty clone spring will allow the engine builder to custom fit their spring kits. Having been through a specific process,... MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-CL2 Dyno Hi-Performance Dual Valve Spring Kit for Modified Honda / Clone 36lb Dual Valve Spring Kit with Hardware, Clone MSRP: Now: $29.95 Add to Cart Compare Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view TRJ KARTING Aftermarket Clone Intake Race Valve Seat TRJ Performance had these seats specially made to increase the performance over stock clone valve seats. The seat material is softer than stock which helps control valve bounce, creating a better seal when the valve closes. Available in singles and bulk... MSRP: Now: $15.00 Add to Cart Compare Quick view BSP Lightweight Lifter for 6.5 Clone Lightweight Lifter for 6.5 Clone MSRP: Now: $8.95 Add to Cart Compare Quick view sku: HSSCP HIGH STRENGTH SHORT CHROMOLY PUSHROD High strength chromoly pushrod are the best pushrod available. Chromoly is a lot stronger then stainless steel and flexes a lot less which is very important with the high RPM's we are getting out of these engines. These pushrods are 1mm shorter then the... MSRP: Now: $2.95 Add to Cart Compare Quick view TRJ KARTING | sku: AKRACNCAS AKRA Ported Race Head Bare or Assembled TRJ Karting AKRA CNC Ported Cylinder heads are among the best in the country and were developed after months flow work, dyno testing and redesigns. These heads are CNC machined for consistent quality head to head. they are completely Blue Printed and... MSRP: Now: $245.00 Choose Options Compare Quick view sku: dcsbp Dyno (22 lbs) BUILDER PREPARED Clone Valve Spring Dyno A.K.R.A. BUILDER PREPARED Clone Valve Spring (22 lbs) MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-BSH Dyno Hardened Green Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Green Stripe" springs are the same as our DCS-BS 10.8 lb spring but have been through a specific process to reduce the amount of spring pressure loss from running in the engine. DCS-BS lose between .8-1.2 lbs of spring pressure where... MSRP: Now: $4.95 Add to Cart Compare Quick view DYNO | sku: DCS-BSH-D Dyno Hardened RED Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Red Stripe" spring is the strongest 10.8 lb spring on the market and thus rightfully named Heavy Duty. The Heavy Duty clone spring will allow the engine builder to custom fit their spring kits. Having been through a specific process,... MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-CL2 Dyno Hi-Performance Dual Valve Spring Kit for Modified Honda / Clone 36lb Dual Valve Spring Kit with Hardware, Clone MSRP: Now: $29.95 Add to Cart Compare Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view BSP Lightweight Lifter for 6.5 Clone Lightweight Lifter for 6.5 Clone MSRP: Now: $8.95 Add to Cart Compare Quick view sku: HSSCP HIGH STRENGTH SHORT CHROMOLY PUSHROD High strength chromoly pushrod are the best pushrod available. Chromoly is a lot stronger then stainless steel and flexes a lot less which is very important with the high RPM's we are getting out of these engines. These pushrods are 1mm shorter then the... MSRP: Now: $2.95 Add to Cart Compare Quick view TRJ KARTING | sku: AKRACNCAS AKRA Ported Race Head Bare or Assembled TRJ Karting AKRA CNC Ported Cylinder heads are among the best in the country and were developed after months flow work, dyno testing and redesigns. These heads are CNC machined for consistent quality head to head. they are completely Blue Printed and... MSRP: Now: $245.00 Choose Options Compare Quick view sku: dcsbp Dyno (22 lbs) BUILDER PREPARED Clone Valve Spring Dyno A.K.R.A. BUILDER PREPARED Clone Valve Spring (22 lbs) MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-BSH Dyno Hardened Green Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Green Stripe" springs are the same as our DCS-BS 10.8 lb spring but have been through a specific process to reduce the amount of spring pressure loss from running in the engine. DCS-BS lose between .8-1.2 lbs of spring pressure where... MSRP: Now: $4.95 Add to Cart Compare Quick view DYNO | sku: DCS-BSH-D Dyno Hardened RED Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Red Stripe" spring is the strongest 10.8 lb spring on the market and thus rightfully named Heavy Duty. The Heavy Duty clone spring will allow the engine builder to custom fit their spring kits. Having been through a specific process,... MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-CL2 Dyno Hi-Performance Dual Valve Spring Kit for Modified Honda / Clone 36lb Dual Valve Spring Kit with Hardware, Clone MSRP: Now: $29.95 Add to Cart Compare Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view sku: HSSCP HIGH STRENGTH SHORT CHROMOLY PUSHROD High strength chromoly pushrod are the best pushrod available. Chromoly is a lot stronger then stainless steel and flexes a lot less which is very important with the high RPM's we are getting out of these engines. These pushrods are 1mm shorter then the... MSRP: Now: $2.95 Add to Cart Compare Quick view TRJ KARTING | sku: AKRACNCAS AKRA Ported Race Head Bare or Assembled TRJ Karting AKRA CNC Ported Cylinder heads are among the best in the country and were developed after months flow work, dyno testing and redesigns. These heads are CNC machined for consistent quality head to head. they are completely Blue Printed and... MSRP: Now: $245.00 Choose Options Compare Quick view sku: dcsbp Dyno (22 lbs) BUILDER PREPARED Clone Valve Spring Dyno A.K.R.A. BUILDER PREPARED Clone Valve Spring (22 lbs) MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-BSH Dyno Hardened Green Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Green Stripe" springs are the same as our DCS-BS 10.8 lb spring but have been through a specific process to reduce the amount of spring pressure loss from running in the engine. DCS-BS lose between .8-1.2 lbs of spring pressure where... MSRP: Now: $4.95 Add to Cart Compare Quick view DYNO | sku: DCS-BSH-D Dyno Hardened RED Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Red Stripe" spring is the strongest 10.8 lb spring on the market and thus rightfully named Heavy Duty. The Heavy Duty clone spring will allow the engine builder to custom fit their spring kits. Having been through a specific process,... MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-CL2 Dyno Hi-Performance Dual Valve Spring Kit for Modified Honda / Clone 36lb Dual Valve Spring Kit with Hardware, Clone MSRP: Now: $29.95 Add to Cart Compare Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view TRJ KARTING | sku: AKRACNCAS AKRA Ported Race Head Bare or Assembled TRJ Karting AKRA CNC Ported Cylinder heads are among the best in the country and were developed after months flow work, dyno testing and redesigns. These heads are CNC machined for consistent quality head to head. they are completely Blue Printed and... MSRP: Now: $245.00 Choose Options Compare Quick view sku: dcsbp Dyno (22 lbs) BUILDER PREPARED Clone Valve Spring Dyno A.K.R.A. BUILDER PREPARED Clone Valve Spring (22 lbs) MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-BSH Dyno Hardened Green Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Green Stripe" springs are the same as our DCS-BS 10.8 lb spring but have been through a specific process to reduce the amount of spring pressure loss from running in the engine. DCS-BS lose between .8-1.2 lbs of spring pressure where... MSRP: Now: $4.95 Add to Cart Compare Quick view DYNO | sku: DCS-BSH-D Dyno Hardened RED Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Red Stripe" spring is the strongest 10.8 lb spring on the market and thus rightfully named Heavy Duty. The Heavy Duty clone spring will allow the engine builder to custom fit their spring kits. Having been through a specific process,... MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-CL2 Dyno Hi-Performance Dual Valve Spring Kit for Modified Honda / Clone 36lb Dual Valve Spring Kit with Hardware, Clone MSRP: Now: $29.95 Add to Cart Compare Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view sku: dcsbp Dyno (22 lbs) BUILDER PREPARED Clone Valve Spring Dyno A.K.R.A. BUILDER PREPARED Clone Valve Spring (22 lbs) MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-BSH Dyno Hardened Green Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Green Stripe" springs are the same as our DCS-BS 10.8 lb spring but have been through a specific process to reduce the amount of spring pressure loss from running in the engine. DCS-BS lose between .8-1.2 lbs of spring pressure where... MSRP: Now: $4.95 Add to Cart Compare Quick view DYNO | sku: DCS-BSH-D Dyno Hardened RED Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Red Stripe" spring is the strongest 10.8 lb spring on the market and thus rightfully named Heavy Duty. The Heavy Duty clone spring will allow the engine builder to custom fit their spring kits. Having been through a specific process,... MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-CL2 Dyno Hi-Performance Dual Valve Spring Kit for Modified Honda / Clone 36lb Dual Valve Spring Kit with Hardware, Clone MSRP: Now: $29.95 Add to Cart Compare Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view sku: DCS-BSH Dyno Hardened Green Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Green Stripe" springs are the same as our DCS-BS 10.8 lb spring but have been through a specific process to reduce the amount of spring pressure loss from running in the engine. DCS-BS lose between .8-1.2 lbs of spring pressure where... MSRP: Now: $4.95 Add to Cart Compare Quick view DYNO | sku: DCS-BSH-D Dyno Hardened RED Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Red Stripe" spring is the strongest 10.8 lb spring on the market and thus rightfully named Heavy Duty. The Heavy Duty clone spring will allow the engine builder to custom fit their spring kits. Having been through a specific process,... MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-CL2 Dyno Hi-Performance Dual Valve Spring Kit for Modified Honda / Clone 36lb Dual Valve Spring Kit with Hardware, Clone MSRP: Now: $29.95 Add to Cart Compare Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view DYNO | sku: DCS-BSH-D Dyno Hardened RED Stripe Builders Valve Spring (10.8lbs @ .850") (each) Description The "Red Stripe" spring is the strongest 10.8 lb spring on the market and thus rightfully named Heavy Duty. The Heavy Duty clone spring will allow the engine builder to custom fit their spring kits. Having been through a specific process,... MSRP: Now: $4.95 Add to Cart Compare Quick view sku: DCS-CL2 Dyno Hi-Performance Dual Valve Spring Kit for Modified Honda / Clone 36lb Dual Valve Spring Kit with Hardware, Clone MSRP: Now: $29.95 Add to Cart Compare Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected
Quick view sku: DCS-CL2 Dyno Hi-Performance Dual Valve Spring Kit for Modified Honda / Clone 36lb Dual Valve Spring Kit with Hardware, Clone MSRP: Now: $29.95 Add to Cart Compare Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected
